Standard Installations

Acousti-Phonic with Quickswitch
The standard way of wiring the Acousti-Phonic, same as in the manual with the addition of the optional QuickSwitch for mag/both/acoustic.
Thu, 27 Aug, 2015 at 2:58 PM
Acousti-Phonic Kit
The standard way of wiring the Acousti-Phonic, same as in the manual, with the Acoustic Pot with Mid/Dark Switch and a QuickSwitch (PK-0240-00 or PK-0340-00...
Thu, 27 Aug, 2015 at 3:09 PM
Powering Active Pickups
The standard installation for active pickups like EMG's.  Shows how both the Acousti-Phonic and active pickups can run off the same battery source, fro...
Thu, 27 Aug, 2015 at 3:11 PM
Hexpander First Row
These connections are on the Hexpander's pass-through connector to the Acousti-phonic when they're piggybacked together, so they're the same ...
Thu, 27 Aug, 2015 at 3:12 PM
Hexpander Second Row
The standard connections for the Hexpander pickups, optional switches, and volume pot.
Thu, 27 Aug, 2015 at 3:14 PM
Pin 7 Harness
Connect the Pin 7 harness in Hexpander-only installations so that mag and acoustic are available on the 13-pin connector. Note this requires the addition of...
Fri, 28 Aug, 2015 at 8:12 AM
Passive Volume Kit
This is how you install the Passive Volume Kit (PE-0400-00) when only using a set of ghost loaded saddles or a ghost loaded bridge without a preamp.
Fri, 28 Aug, 2015 at 8:19 AM